Vulcan CBFT Manuale Utente Scaricare il pdf (Pagina 4)

F-47102 (06-14) CBFT SERIES

3

GENERAL

INTRODUCTION

Vulcan Heated Holding Cabinets are

produced with quality workmanship and

material. Proper installation, usage, and

maintenance of your cabinet will result

in many years of satisfactory

performance.

It is suggested that you thoroughly read

this entire manual and carefully follow all

of the instructions provided.

The CBFT Correctional Holding

Cabinets are “Heavy Duty” and

designed for tough transportation

operations.

INSTALLATION

Before installing, verify that the electrical

service agrees with the specifications on

the rating plate located on the lower

back corner of the cabinet. (Fig.1) If the

supply and equipment requirements do

not agree, do not proceed with

unpacking and installation. Contact

your Vulcan Customer Service

Department immediately.

UNPACKING:

The Cabinet was inspected before

leaving the factory. The transportation

company assumes full responsibility for

safe delivery upon acceptance of the

shipment. Immediately after unpacking,

check for possible shipping damage to

the cabinet.

If the cabinet is found to be damaged,

save the packaging material and

contact the carrier within 15 days of

delivery.

Carefully unpack and place in a work

accessible area as near the installation

position as possible.

1. Open the door and carefully

remove any packaging materials.

2. Peel off vinyl protection film.

CLEANING:

The cabinet should be thoroughly

cleaned prior to putting into service.

Use a mild soap and water solution to

clean the interior of the unit. Never use

harsh chemicals or abrasive pads to

clean the unit. Refer to cleaning

instructions in this manual.

LOCATION:

For efficient cabinet operation, choose a

location that will provide easy loading

and unloading without interfering with

the final assembly of food orders.

The installation location must allow

adequate clearances for servicing and

proper operation.

1 2 3 4 5 6 7 8 9 ... 19 20

Commenti su questo manuale

Nessun commento